The drill-out, clean-up, and testing of a hydraulically fractured well is critical to ensure stimulation success. This period is important both for production and environmental reasons, due to the high risk of gas release. Most wells require a sand separator during clean-up, which are a source of fugitive emissions. These emissions often go unreported during flowback due to the challenge in their quantification.
This work improves on a study by Wasfy et al (SPE, 2019) which investigated sand separator fugitive emissions. The analysis is improved by categorizing the differences in draining mechanisms between four different separator styles: vertical cyclonic separators, horizontal separators, spherical separators, and vortex separators. A simple 3-stage mathematical model is presented to calculate emissions based on drain duration for online sand separators which are drained without isolating the vessel. A vortex separator was found to provide the lowest overall fugitive emissions release. Prior work was found to have significantly underestimated the emissions released by horizontal separators.
Field experiments were performed using freestanding atmospheric gas plume sensors to validate the model. Measured gas releases were within 6% of the volume predicted by the 3-stage model at field conditions. This model can be used by engineers to accurately assess different styles of sand separators in hydraulic fracturing, allowing for more accurate reporting and quantification of fugitive emissions.
As fracing technology improves, production rates increase. This also increases sand production and potential erosion of production equipment which can present rigorous challenges and lead to a significant increase in a producer’s OPEX.
To keep up with increased production rates, Sandtinel's Research and Development Team leverages Computational fluid dynamics, or CFD, a powerful design tool that simulates and accurately predicts sand particle and flow behaviors, to design and continuously improve the efficiency of our sand management solutions.
We have gone through multiple product design iterations and modifications of our Sandtinel Sand Separator to continuously reduce sand carry-over and increase the ability to handle higher production rates.
To date, Sandtinel can handle 650 m3/day of total oil and produced water while maintaining a minimal .05% sand carry-over. And we're still going…
Want to see your well's potential? Send us your well data and we can show you exactly how it will perform in one of our vessels.
The infantry & bedrock of the Sandtinel Guard, the Defender’s sheer power & adaptability can combat sand in any well condition, in any basin, protecting equipment from flowback erosion and downstream degradation.
Q. Let’s start with the basics - what is sand?
A. Sand is a blanket term that covers a wide range of different types of granular solids. Most sand has a big component of crystalline silica, or quartz.
Q. What are the different types of sand and why is it important to know what type you’re working with?
A. There’s all sorts of different types of sand, like river sand taken from river banks, concrete sand made from crushed concrete, and even manufactured sand which production companies smash and crush from larger rocks. We are most interested in frac sand which is made from high purity sandstone, and is pretty pure crystalline silica, or quartz.
Q. Why and how is sand used in the fracturing process?
A. In the fracturing process, frac sand is mined before it’s transferred to a wet plant to remove all the silt, debris, and other contaminants from it. It gets dried and screened in a dry plant before being sent to site. During the drilling and completion process, a rig drills a hole several thousand feet down, then turns 90 degrees and drills through a layer of shale; this is the wellbore. A pressurized mix of water and frac sand are forced into the well which fractures perforations in the shale layer. This releases hydrocarbon liquids which flow up the wellbore to the surface.
Q. Is there a difference between the sand that’s in-situ and sand used in the fracturing process?
A. There definitely is. There’s a mix of sand that returns to the surface along with the oil that needs to be safely and effectively separated. The frac sand is usually high quality and very hard so it maintains its shape well. If it’s coated in resin during its production process, it will be even more durable to stand up to large stresses. However, that’s not the only source of sand in the mix. There’s also formation sand that breaks off underground which can come up through the wellbore as well. This is usually based on the geographic region, and it has all the impurities and other minerals which are screened out of frac sand. This formation sand usually breaks down a lot more, getting crushed up and broken into needle-like fragments.
Ultimately it is a mix of frac sand and formation sand which we need to deal with for sand removal.
Q. What makes sand challenging to work with/remove?
A. Sand has a tendency to get everything and can be extremely abrasive, especially at high velocities. Once it gets into your system it will accumulate everywhere – strainers, tanks, elbows, seals – and pretty much anywhere else the fluid touches.
Sand is measured in “mesh size” which is sort of like the fineness of a filter that would let the sand pass through it. But in reality any given sand blend has a huge range of different sizes. Knowing the frac sand blend (often 100 mesh) doesn’t tell you what size the formation sand is that’s coming back, nor does it tell you how the sand might have broken down during fracturing.
One of the challenges we face is that as sand has grown in demand, companies use whatever sand is available instead of the perfect grade of frac sand. This lower quality sand causes issues with removal afterwards. Smaller sand, getting down to “fines,” can be really challenging to remove by mechanical means (without the use of a filter and without external power, chemicals, etc). Bigger sand causes more damage, but smaller sand is harder to catch because it builds up everywhere and can be expensive to remove.
The trends we have seen are for producers to try to open their wells more aggressively and as quickly as possible because that’s been seen to maximize production. However, that also often ends up pulling more sand out of the wellbore, which needs to be effectively dealt with on the surface before it wrecks all of your equipment.
Q. What are the risks that come with sand separation?
A. Sand separators are safe pressure vessels as long as they are built and maintained properly, and receive regular NDT to ensure their ongoing integrity. The biggest risk is that it might not work effectively for you to remove the sand you’re hoping to remove. Other problems that can arise include:
Q. How does Sandtinel technology mitigate these risks?
A. Sandtinel sand separators have a very wide operating curve to match the operating conditions over the entire lifespan of a well so that you don’t need to be constantly changing out separators or inserts. There are no sacrificial elements like filters to replace or any external power requirements, making it a very simple piece of technology to incorporate into your process.
Sandtinel spheres provide high separation efficiency, targeted at a minimum of 95% sand removal for sand of 100 mesh and larger. Fugitive emissions are extremely low on Sandtinel separators as a consequence of the Vapor Lock technology in the vortex separator design. They also experience a very low back pressure and do not pull on a well, resulting in a sand separator that gets out of your way and lets you operate your well the way you want to.
Q. How does sand affect the degradation of equipment?
A. There are different approaches to dealing with the risk of sand erosion but some producers have given up on finding a sand separator that will really work for them, because there have been so many false promises in this field in the past. In fact, it’s common for sand separator vendors to just claim 99% or 100% sand removal with no data and nothing to back that up.
We’ve done some modeling to understand the effect of sand on erosion for pipe walls. It’s hard to quantitatively prove how effective sand separators are, so it doesn’t become apparent that these are false promises until you see the damage afterwards. This is why we are so excited not just to bring a new sand separator to the market which can handle the modern flowback environment, but to be able to prove it with extensive case studies, modeling, and data collection in the field.
This is why we are so excited not just to bring a new sand separator to the market which can handle the modern flowback environment, but to be able to prove it with extensive case studies, modeling, and data collection in the field.
Q. What happens to the sand once it’s been separated?
A. That depends on local practices and regulations. But in general, sand collects inside of a Sandtinel separator until it’s drained. The liquid sand slurry is sent to a downstream holding tank, or blowdown tank. We can use load cells and/or guided wave radar to monitor the collected sand, and then when it’s full, you would get it emptied out and disposed of safely.
Q. What makes Sandtinel spheres unique from other separators?
A. Sandtinel sand separators are a style of “vortex separator” which use patented Vapor Lock Technology to isolate gas in the upper hemisphere of the vessel. They’re radically different from other spherical separators which typically use a deflector baffle to try to knock sand out of the incoming fluid. By temporarily isolating the gas, we drastically slow down the liquid which has the sand entrained inside of it, providing a really long settling distance and retention time in a pretty small footprint (our separators are typically 48” inner diameter spheres). The Vapor Lock system also significantly reduces fugitive gas emissions during dump operations compared to other sand separators and experiences very little back pressure across the unit. Sandtinel separators provide the highest sand separation efficiency possible using mechanical means, aiming for a minimum of 95% sand removal at a sand size of 100 mesh and larger, over a broad operating envelope.
Denver, Colorado, September 17, 2021 - Frac Shack Inc. announced it has rebranded to Energera Inc.
“Our industry is changing to meet the energy needs for the next century, and we will be part of that change”, said Todd Van Vliet, the CEO. “Our existing brands including Frac Shack, Sandtinel and NG Sidekick will not go away, but will be part of our larger vision to provide technology for the new era of energy”.
Energera Inc. is the parent company of Canadian operating companies Frac Shack International Inc. and Sand Separation Technologies Inc., of U.S. entities Frac Shack America Inc. and Sandtinel LLC, as well as the Argentinian company Frac Shack S.A.S.
“We are a technology company, with ambitions to drive improvement in our industry sector, and energy production overall. We realized our name told only part of that story. Energera™ is all about change. It speaks of a relentless drive for improvement, proud of its past but also hungry for a bright future in energy”, said Van Vliet.
The announcement was made at the commencement of a charity golf tournament in Denver, organized by Energera™ to help raise money for Oilfield Helping Hands. This charity is dedicated to helping oilfield families in financial crisis.
For more information on Energera Inc. and its mission, please visit www.energera.com.
Energera – Technology for the New Era of Energy®
This website is owned, operated, and maintained by Sandtinel, referred to as "this website" in the following document.
This website respects the privacy of our employees, our suppliers and our clients and ensures that the personal information we collect remains secure and protected. There are times where personal information must be shared with an interested third party. In such circumstances, this website will not release any personal information without first advising of its intended use and obtaining the permission to do so from the affected individual.
We do not automatically gather any personal information from you, such as your name, phone number, email, or address. This information is only obtained if you supply it voluntarily, usually through contacting us via email or registering in a secure portion of the site. By choosing to provide us with your Personal Information, you are consenting to its use in accordance with the principles outlined in this Privacy Policy and as outlined at the time you are asked to provide any Personal Information.
Any personal information you do provide is managed according to the Alberta Freedom of Information and Protection of Privacy Act. This means that, at the point of collection, you will be informed that your personal information is being collected, the purpose for which it is being collected and that you have a right of access to the information.
Our policy is designed to meet or exceed the requirements of Canadian Federal and Provincial privacy laws. We constantly self-evaluate our practices and procedures to maintain the highest standard in this regard.
This website will make every effort to ensure personal information remains current and is updated internally and with third party suppliers in a timely manner. Individuals are expected to update this website with any changes to their personal information. The information will only be updated when required for the intended, previously described purposes.
Only employees who need the information to perform a specific job have access to personal information.
We have secure databases where we store data. We also may store your personal information in paper document files in our offices.
The processes of our business include sharing your personal information with others to carry out our placement services.
Email transmission can be accessed by other Internet users. If you want to keep certain information confidential you may contact us by telephone, in person, or via mail.
This website has set mandatory retention time limits based on Provincial Employment and Labour Standards and third-party suppliers are instructed to follow the same guidelines. Appropriate safeguards relevant to the sensitivity of the information will be employed.
This website will use your Personal Information to contact you for support purposes. If you wish to be removed from our contact database, please info@energera.com.
Like most web servers on the Internet, this website' servers maintain access logs that record web browser activity. These logs associate an Internet Protocol (IP) address with each request for content from the servers.
When you visit this web site, our web server automatically collects a limited amount of standard information essential to the operation and evaluation of the web site. This information includes:
This information helps us assess our information services and is used only for this purpose. It is collected in compliance with section 33 of the Freedom of Information and Protection of Privacy (FOIP) Act.
This information is collected in order to help make our site more useful to visitors, to learn about the number of visitors to our site, and to learn about the types of technology our visitors use. We do not track information about individuals and their visit. We will not identify users or their browsing activities, except as required by a law of Alberta or Canada or if we are compelled to produce this information for a legal proceeding.
For security purposes and to ensure that this service remains available to all users, this computer system employs software programs to monitor network traffic to identify unauthorized attempts to upload or change information, or otherwise cause damage.
Except for authorized law enforcement investigations, no other attempts are made to identify individual users or their usage habits.
Our web servers are able to use "cookie" technology to keep track of the web browsers with which they are communicating.
During a cookie transaction, a web server will hand a web browser some data prescribed by the web site's developers. The web browser will return that data with its next request for content
from the web site. Using this technology, it is possible for an application running on a web server to distinguish one web browser's activity from another.
This website' web servers will make use of such cookies when required to identify ongoing sessions with individual online visitors. Examples include:
In all cases, the cookie data this website' web servers may hand your browser contain only "session" identifying information. No other personal information is passed to your browser, where it may be stored on your own computer.
Cookie-related data is not permanently stored on this website' web servers. Information stored temporarily in our cookie collection never includes a visitor's name or address or sensitive data.
Further, this website does not match for its records any session-identifying cookie information with the Internet Protocol (IP) addresses described above in the information on monitoring Web-Site Traffic.
This website is committed to the security of personal information it may collect online or offline. This website has taken reasonable precautions to protect this personal information from loss, misuse or alteration. Any third parties who may have roles in managing such information on behalf of the this website are also committed to the same principles.
This website includes links to web pages or sites operated by third parties. We endeavor to make it clear that certain links will take you away from our site and to destinations over which we have no control.
Our public website privacy statement does not apply to the sites of third parties to which we link. Instead, we encourage you to review the policies of these sites yourself upon your arrival.
This website will release your personal information to you upon request, along with the use and disclosure of any personal information.
Specific requests for information can be directed to the Privacy Officer via info@energera.com. The information will be released within 30 days of receipt of the request. Should this website not be able to comply with the request, a justifiable reason will be given to the requestor. This website considers the following reasons justifiable reasons to refuse access to personal information.
This list is not exhaustive and other reasons may be considered justifiable.
You have the right to file a challenge about this website's compliance with Privacy legislation. This website will consider all requests seriously and will investigate any complaints thoroughly. To make a challenge please send all relevant details and specifics to this website's Privacy officer at info@energera.com.
This website will occasionally update this privacy statement. When we do, we will also revise the "last updated" date at the top of the privacy statement. For material changes to this statement, this website will notify you by placing prominent notice on the website.
For questions or comments regarding this public website privacy statement please contact us by email: info@energera.com.